OfCourseNot

People here saying single handle faucets must have much better ones than what we’ve got where I’m from, no fucking chance of getting the same temperature again after shutting it. And the middle of it is extremely sensitive, it goes from 10% to 90% in like the middle two millimeters, and I think the pressure of the hot water overcomes the cold’s so you have to turn a bit left and then right again to stabilize the temp.

For my shower, which is the one that matters most for me, I got a thermostatic one—you set the temperature on the right handle and the flow on the left one, and that’s it, perfect temperature forever. Even if someone flushes, which only happens when my sister is visiting because she doesn’t understand boundaries, it doesn’t change one whole degree for more than a second, only the flow is be affected.

As a side note my grandma’s bath tube some 30+ years ago (it had probably another 30 or more) had two handles for hot-cold, left and right, and then another two for the shower-faucet flow, up and down. It wasn’t as fine tuned as my modern one, but worked quite well. You would only open or shut without touching the proportion of hot/cold.

Only porn allowed will be missionary position?

No. I think it’s a step by step approach, that will go further than that. After only missionary, they’ll make the actors get married before having any sex, all under the blankets and as clothed as possible, no condom or pulling out allowed either, and at the end of the scene it has to show the beautiful baby born nine months after. No gay porn, of course, or trans, interracial, more than to people (man™️ and woman™️)… sex is for procreation! How you dare enjoying it, you sinner!

I recognise their username. It’s half sane takes, half absolute wankery with them.

I think you’re right with the kebab, I literally don’t know a single person that calls them ‘doner’, it’s always just kebab, and many kebab places where I live have dropped the doner as well.

G’day curd nerd! The cheese and desist thing was definitely a dick move by this Italian consortium, but iirc they later admitted that they had overstepped and ended in good terms with the Aussie youtuber.

they can’t force you to make food a specific way, right?

I see you’re not very familiar with the eu. They can and they do, if you want to call it some specific name they force you to do it in some specific way, or to source the ingredients or even make it in a specific place. It does make sense, in a way, but it also can get to ridiculous points some times.

And the widespread use of stimulants like coffee, tea, and cocaine.

placing him in the company of luminaries such as Rosa Parks, Martin Luther King Jr. and Mother Teresa

One of these persons is not like the others…

Remember that unemployment rate here counts only people inscribed in the unemployment services. I don’t think half of them are working illegally, at best that would be a rounding error.

Downsizing the bureaucracy would take many years, since public servants ‘cannot be fired’ (bit of an oversimplification, but the reality in practice), and would take some strong political will, which we lack in Spain.

And about the armed forces, I know some ex-military that are kinda left-leaning, but the average is absolutely right leaning (from straight up nazis, to ‘apoliticals’ that if you talk with them for a short while will let go some racist, homophobic, or generally reactionary comments very casually). And that’s the rank and file, if you go to the higher ups you’ll find, well, as many fascist as you can expect from a military that wasn’t purged or rehabilitated after a fascist regime.

Even then, when a coup was attempted, the majority of the armed forces shut it down

Do you mean the coup that the king himself organized so he could stop it afterwards to come out as the hero that saved the day while also putting some fear in the population?? That coup d’état ‘attempt’??

I don’t think that’s right. This other link (from another commenter in this thread), also euronews, says 47%. Anecdoticaly I get €1800 in my bank account every month, but cost my employer €3200.

Kinda tricky to compare taxes from one country to another.

Spain’s budget is ~21% of its gdp (with >10% unemployment you can imagine how bad they fucking bleed us with taxes, the poor I mean, for the rich is the same as anywhere else), but more than half of it goes to pensions, and we have a huge ,dense, and expensive bureaucracy that takes a good chunk of the rest (I don’t have numbers sorry).

So, I think you are right, there’s just no more money: touching the pensions is political suicide (and very unfair), scaling down bureaucracy is just impossible, rising taxes would suffocate us (even more), taxing the rich is as much of a fairy tale as it is in any other country…

On top of that, if you read a history book you will see that the Spanish military is a much bigger threat for Spain than the Russian. I don’t think it’s in the best interest of the Spanish people to give them more money.

I’ve been pirating since Napster, never have hidden shit. It’s usually not a crime, except in America it seems, to download content, or even share it freely. What is a crime is to make a business distributing pirated content.

It is not a matter of more or less aggressive, some materials dissolve more easily in one type of solvent than in others. You can try, dissolving a teaspoon of salt in water is much easier than in oil. Have you ever eaten chocolate or drunk water while chewing bubblegum? Here the opposite happens, the fats in the chocolate dissolve the bubblegum rubber and make it softer while water doesn’t, it just chills it which makes it firmer.

Now plastic, rubber, or paints, finishings… can be many different things. IPA is safe to use on natural rubber while oils will make it swell and degrade, or even melt it. But most rubbers are synthetic, basically rubbery plastic. These plastics and other engineered materials can have all kind of different properties, while looking exactly the same. So the only thing you can do, other than research on that particular material and solvent, is trying it on a safer or hidden part of the thing.

In my experience: oil isn’t good on most rubbers, IPA is ok. For metals (iron, steel, mechanical parts…), contrary to you I usually advise to clean them with oil/grease, alcohol is appropriate if you don’t want it to be oily, only in rust resistant metals. Consumer/industrial products paints and finishings are usually fine with both ipa and oil if applied swiftly and dried quickly– acetone, kerosene, toluene… will strip them away probably. For wood, almost everything will fuck it up.

money, the copyright and the politics

Of course, the things that haven’t affected the internet or haven’t been affected by it at all.

Wait, you Frenchies have 100% pay for ordinary sick leave??? I guess we’ll have to get some hi viz vests and a handful of lighters over here.

Edit: is it just for civil servants? Do workers for private companies get a 100%?

Why is the word Israel, consistently through the whole site, between quotes?

Yep I know. These are the ones the company buys. I’ve tried others when I had to buy a box while out and about but n a hardware store or even a supermarket. Latex gets destroyed very fast, I didn’t notice much of a difference with vinyl… but you are right I have to try if some other material goes better. The thing is I don’t have a clue what the fuck they put in the inks and nobody seems to be able to tell me.

I sincerely doubt these newcomers can achieve at their first try what well established manufacturers haven’t through revision after revision of their machines. The price is the first clue, flatbed uv printers this size start at about ten thousand. Also, important information like which printhead they mount, printing speed (m2/h), uv lamp wattage… is missing which is suspicious at best.

Not at all like a resin printer. Imagine a hybrid: the top part is an inkjet printer with a printhead that goes side-to-side shooting ink but instead of paper sliding under it there’s a flatbed not unlike the one in a filament 3D printer. The ink is cured by a uv lamp (or more than one, but I suspect this printer has only one and very small and weak since the smaller lamp I work with costs more than this hole printer) usually fixed to the side of the printhead ‘carriage’.

No. Just don’t! You nerds, tinkerers, hackers, makers… listen to me: DO NOT BUY THIS.

I didn’t think I’d have to read the words ‘Consumer UV printer’ ever. It’s just a deranged concept. UV printers are the worst kind of machines there are. Imagine an inkjet printer but a thousand times worse, I’m not joking. I work with these, but professional/industrial ones, in professional printshops, and they are an absolute toothache for my customers (again, professionals that make a living with printers and similar equipment). The customers like me, because I’m the one solving them problems (even if the bill for the solutions is more often than not a few thousands) but I’m sure the salespeople look under their cars every morning.

This will only be a hole in your pocket, a piece of junk taking up space in your home, and even a hazard to your health or your kids’ or pets’–UV ink is some nasty shit before curing, some of them make my hands itch even trough the nitrile gloves, and you have to handle and dispose of the waste ink properly ie hiring some waste management service.

It’s true that you can make beautiful things with them, but for a home it’s just not worth it, just take your designs and your media (the things you want to print on) to a print shop and have them printed there.